Bayzik Manufacturing LTD

Bayzik Manufacturing Inc. manufactures the Bayzik 800 Heater for use in heavy industrial settings. The Bayzik 800 Heater provides superior output capacity by maximizing BTU transfer from fuel to output with a uniquely designed heat exchanger and using dual blowers.

Fired Heaters

Heater capacity ratings are based on how much fuel they consume NOT the amount of heat delivered. A one million BTU per hour heater consumes the heat equivalent of one million BTU of fuel per hour. If the heat exchanger is only 30% efficiently; however, then only 300,000 BTU of heat per hour is transferred to the fresh application air - the rest is wasted.

The number of heaters required for a project depends on how much heat they deliver NOT how much fuel is consumed. An efficient heater with a much higher BTU output capacity can replace several less efficient heaters.

A one million BTU per hour diesel fired heater running 24 hours per day for one month will consume about 21,000 litres of diesel fuel. The cost of 21,000 litres of diesel is significant. In addition, the fuel must be delivered to site, and ongoing labour time is involved in refueling the heater. It simply makes economic sense to use a more efficient heater.

The Bayzik 800 Heater

The Bayzik 800 Heater has a large heat exchanger through which fresh application air passes 3 times before output. The fuel tank holds enough fuel for 40 hours of run time, and dual blowers provide high capacity output to the project. A Bayzik 800 Heater can save your project thousands of dollars in fuel.

Bayzik Manufacturing Inc.

HEATER AND TRAILER SPECIFICATIONS
Heater	Bayzik Model 800 Indirect Fired Self Contained (no combustion gases in heated air
Operating Specifications	Temperature Rise - 96ºC (200ºF Output Air Volume - CFM @ 3" SP - 3,900 BTU Per Hour - 800,000
Engine	Isuzu diesel, 3CD1, 1.5 litres
Engine Controls	Manual key with low oil pressure and over temperature auto shut down
Electrical	AC Stamford generator 12 Kw, 3 phase, 208 Vac, 60 Hz
Burner	Riello 40 Model F15 Solid State
Fans	Backward Inclined Blade (Centrifugal)
Burner Range	2.5-5.71 GPH firing rate (US)
Fuel and Tank Capacity	Diesel 270 Gallons (US)
Fuel Consumption – heater only	48 hours run at full firing rate of 5.71 GPH
Fuel consumption – engine only	.94 GPH at full load
Fuel Consumption combine – heater & engine	39.4 hours runtime at full load
Combustion Chamber	Stainless steel
Heat Exchanger	Stainless steel - 3 Pass
Construction	Fabricated steel fully enclosed tandem trailer mounted with forklift pockets and lifting lugs
Hitch	Pintle or Ball
Dimension	Length - 216" (18') Width - 98" (8'2") Height - 86" (7'2")
Trailer weight without fuel	6,310 Lbs